|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
FDC638P September 2001 FDC638P P-Channel 2.5V PowerTrench(R) Specified MOSFET General Description This P -Channel 2.5V specified MOSFET is produced using Fairchild Semiconductor's advanced PowerTrench process that has been especially tailored to minimize the on-state resistance and yet maintain low gate charge for superior switching performance These devices are well suited for battery power applications: load switching and power management, battery charging circuits, and DC/DC conversion. Features * -4.5 A, -20 V. RDS(ON) = 48 m @ V GS = -4.5 V RDS(ON) = 65 m @ V GS = -2.5 V * Low gate charge (10 nC typical) * High performance trench technology for extremely low RDS(ON) * SuperSOT TM -6 package: small footprint (72% smaller than standard SO-8; low profile (1mm thick) S D D 1 6 5 SuperSOT -6 TM G pin 1 2 3 D D 4 Absolute Maximum Ratings Symbol V DSS V GSS ID PD TJ , TSTG Drain-Source Voltage Gate-Source Voltage Drain Current - Continuous - Pulsed TA=25oC unless otherwise noted Parameter Ratings -20 8 (Note 1a) Units V V A -4.5 -20 1.6 0.8 -55 to +150 Power Dissipation for Single Operation (Note 1a) (Note 1b) W C Operating and Storage Junction Temperature Range Thermal Characteristics RJA RJ C Thermal Resistance, Junction-to-Ambient Thermal Resistance, Junction-to-Case (Note 1a) (Note 1) 78 30 C/W C/W Package Marking and Ordering Information Device Marking .638 Device FDC638P Reel Size 7'' Tape width 8mm Quantity 3000 units (c)2001 Fairchild Semiconductor Corporation FDC638P Rev F1 (W) FDC638P Electrical Characteristics Symbol BV DSS BVDSS TJ IDSS IGSSF IGSSR TA = 25C unless otherwise noted Parameter Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate-Body Leakage, Forward Gate-Body Leakage, Reverse (Note 2) Test Conditions V GS = 0 V, ID = -250 A ID = -250 A,Referenced to 25C V DS = -16 V, V GS = 0 V V GS = 8 V, V GS = -8 V, V DS = 0 V V DS = 0 V Min -20 Typ Max Units V Off Characteristics -14 -1 100 -100 mV/C A nA nA On Characteristics V GS(th) VGS(th) TJ RDS(on) Gate Threshold Voltage Gate Threshold Voltage Temperature Coefficient Static Drain-Source On-Resistance On-State Drain Current Forward Transconductance V DS = V GS , ID = -250 A ID = -250 A,Referenced to 25C V GS = -4.5 V, ID = -4.5 A V GS = -2.5 V, ID = -3.8 A V GS = -4.5 V, ID = -4.5 TJ =125C V GS = -4.5 V, V DS = -10 V, V DS = -5 V ID = -4.5 A -0.4 -0.8 3 39 52 54 -1.5 V mV/C 48 65 72 m ID(on) gFS -20 15 A S Dynamic Characteristics Ciss Coss Crss Input Capacitance Output Capacitance Reverse Transfer Capacitance (Note 2) V DS = -10 V, f = 1.0 MHz V GS = 0 V, 1160 195 105 pF pF pF Switching Characteristics td(on) tr td(off) tf Qg Qgs Qgd Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time Total Gate Charge Gate-Source Charge Gate-Drain Charge V DD = -5 V, V GS = -4.5 V, ID = -1 A, RGEN = 6 12 9 33 12 22 18 53 22 14 ns ns ns ns nC nC nC V DS = -10 V, V GS = -4.5 V ID = -4.5 A, 10 2.2 1.5 Drain-Source Diode Characteristics and Maximum Ratings IS V SD Notes: 1. RJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. RJC is guaranteed by design while RCA is determined by the user's board design. Maximum Continuous Drain-Source Diode Forward Current Drain-Source Diode Forward V GS = 0 V, IS = -1.3 A Voltage -1.3 (Note 2) A V -0.73 -1.2 a) 78C/W when mounted on a 1in2 pad of 2 oz copper b) 156C/W when mounted on a minimum pad of 2 oz copper Scale 1 : 1 on letter size paper 2. Pulse Test: Pulse Width < 300s, Duty Cycle < 2.0% FDC638P Rev F (W) FDC638P Typical Characteristics 20 V GS = -4.5V -3.0V -ID, DRAIN CURRENT (A) 15 -2.0V 10 -2.5V RDS(ON) NORMALIZED , DRAIN-SOURCE ON-RESISTANCE 1.6 1.4 VGS = -2.5V 1.2 -3.0V -3.5V -4.0V -4.5V 5 1 0 0 1 2 3 4 -V DS , DRAIN TO SOURCE VOLTAGE (V) 0.8 0 5 10 -ID , DRAIN CURRENT (A) 15 20 Figure 1. On-Region Characteristics. Figure 2. On-Resistance Variation with Drain Current and Gate Voltage. 0.15 RDS(ON) ON-RESISTANCE (OHM) , 1.6 RDS(ON) NORMALIZED , DRAIN-SOURCE ON-RESISTANCE ID = -4.5A V GS = -4.5V 1.4 ID = -2.2A 0.12 1.2 0.09 TA = 125o C 0.06 T A = 25o C 0.03 1 0.8 0.6 -50 -25 0 25 50 75 100 125 150 T J, JUNCTION TEMPERATURE ( oC) 0 1 2 3 4 5 -V GS, GATE TO SOURCE VOLTAGE (V) Figure 3. On-Resistance Variation with Temperature. 15 -I S, REVERSE DRAIN CURRENT (A) V DS = -5V 12 -I D, DRAIN CURRENT (A) 125oC 9 T A = -55oC 25o C Figure 4. On-Resistance Variation with Gate-to-Source Voltage. 100 V GS = 0V 10 1 TA = 125 oC 0.1 0.01 6 25oC 3 -55o C 0.001 0 0.5 1 1.5 2 2.5 -V GS, GATE TO SOURCE VOLTAGE (V) 0.0001 0 0.2 0.4 0.6 0.8 1 1.2 -V SD , BODY DIODE FORWARD VOLTAGE (V) Figure 5. Transfer Characteristics. Figure 6. Body Diode Forward Voltage Variation with Source Current and Temperature. FDC638P Rev F (W) FDC638P Typical Characteristics 5 -V GS, GATE-SOURCE VOLTAGE (V) ID = -4.5A 4 V DS = -5V -10V -15V 1500 CISS f = 1 MHz VGS = 0 V 1200 CAPACITANCE (pF) 3 900 2 600 C OSS 300 1 0 0 3 6 Qg, GATE CHARGE (nC) 9 12 0 0 5 CRSS 10 15 20 -V DS, DRAIN TO SOURCE VOLTAGE (V) Figure 7. Gate Charge Characteristics. 100 RDS(ON) LIMIT -ID, DRAIN CURRENT (A) 10 10ms 100ms 1s 1 DC V GS = -4.5V SINGLE PULSE RJA = 156o C/W T A = 25o C 0.01 0.1 1 10 100 -V DS , DRAIN-SOURCE VOLTAGE (V) 10s 1ms P(pk), PEAK TRANSIENT POWER (W) 50 Figure 8. Capacitance Characteristics. 40 SINGLE PULSE RJA = 156C/W TA = 25C 30 20 0.1 10 0 0.001 0.01 0.1 1 10 100 t 1, TIME (sec) Figure 9. Maximum Safe Operating Area. Figure 10. Single Pulse Maximum Power Dissipation. r(t), NORMALIZED EFFECTIVE TRANSIENT THERMAL RESISTANCE 1 D = 0.5 0.2 0.1 0.1 0.05 0.02 0.01 RJA(t) = r(t) + RJA o R JA = 156 C/W P(pk) t1 t2 SINGLE PULSE 0.01 TJ - TA = P * R JA(t) Duty Cycle, D = t1 / t2 0.001 0.0001 0.001 0.01 0.1 t1, TIME (sec) 1 10 100 1000 Figure 11. Transient Thermal Response Curve. Thermal characterization performed using the conditions described in Note 1b Transient thermal response will change depending on the circuit board design. FDC638P Rev F (W) TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DenseTrenchTM DOMETM EcoSPARKTM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM DISCLAIMER FAST (R) FASTrTM FRFETTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM LittleFETTM MicroFETTM MicroPakTM MICROWIRETM OPTOLOGICTM OPTOPLANARTM PACMANTM POPTM Power247TM PowerTrench (R) QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM SILENT SWITCHER (R) SMART STARTTM STAR*POWERTM StealthTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM TruTranslationTM UHCTM UltraFET (R) VCXTM STAR*POWER is used under license FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant into support device or system whose failure to perform can the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. H4 |
Price & Availability of FDC638P01 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |